ALPINESTARS
ALPINESTARS 2025 S-M10 ERA GOLD/YELLOW/RIO RED HELMET
ALPINESTARS 2025 S-M10 ERA GOLD/YELLOW/RIO RED HELMET
SKU:AS8301123593856
Couldn't load pickup availability
- DESCRIPTION
- SPECIAL ORDERS
- SHIPPING & RETURNS
The goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective, and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation, and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.
The S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.
KEY FEATURES
~ CARBON SHELL CONSTRUCTION | MULTI-LAYER COMPOSITE DISPERSES ENERGY IN IMPACTS ~ 3K high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell. UD carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy. Aramid fibre layer which provides critical penetration protection. This three layer composite combination is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management. The combination of material layers gives improved energy management: limited outer shell deflection making the energy spread wider and better absorbed by the EPS liner.The result of the unique shell lay-up process employed in the M10 construction results in extremely effective impact protection. With a fully equipped helmet testing facility, within Alpinestars Racing Development Center, an exhaustive impact research program has resulted in the Supertech returning linear and oblique impact performance which far improves upon current helmet regulation standard limits. For direct, linear, impact by an average magnitude of 41% and for rotational acceleration, oblique, impact performance by an average of 48%.
~ FOUR DENSITY EPS LINER | THE RIGHT DENSITY IN THE RIGHT AREA ~
Formed with a multi-density EPS polymer, the energy absorbing layer gives an inner helmet profile which soaks up impact forces dissipated over the outer shell at the point of an impact and provides a shape offering a close and comfortable fit.
The energy absorption performance of the M10 is substantially improved by a four section construction that allows for specific densities of polymer to be prepared for different zones around the helmet lining. Not only is energy performance improved but also fit and comfort.
~ EACH HEAD SIZE HAS A DEDICATED SHELL AND EPS DIMENSION ~
The Supertech shell construction is optimised to offer the best fit across the range of four size options. Shell sizes are manufactured in small, medium, large and extra-large to ensure that riders have the correct fit which not only improves comfort but, most importantly, the effectiveness of the helmet in an impact.
The Supertech M10 liner construction combines with the shell to offer highly efficient impact energy management.
~ LIGHTWEIGHT CONSTRUCTION | MEDIUM SIZE WEIGHS IN AT 1240g (ECE) 134Og (DOT) ~
Weight is both a factor in riding performance and safety in a helmet and to ensure the M-10 offers the ultimate in weight saving performance enhancement, preparation and construction of the helmet has been rigorously analysed for weight to strength and energy absorption properties and a strict analysis of all the components used in the Supertech finishing.
Weight of M-10 is 1260g for size Medium (ECE) For DOT: 1370g for size Medium
~ A-HEAD FITMENT SYSTEM | PATENTED SYSTEM PROVIDES ULTIMATE ADJUSTABILITY ~
The Supertech M-10 incorporates a patented system to allow the helmet to be tuned exactly to the riders preference for the height and angle at which the helmet sits on the head. This unique technology allows for an ultra-specific set-up that can be adapted for the type of riding and the rider’s preference. With a micro-adjustable pad that is connected to the helmet inner shell, it is possible to raise or lower the helmet fit and also, to tilt the helmet forward, or backwards.
~ PATENTED VISOR RELEASE SYSTEM ~
Allows visor to release in a crash with the correct pre-determined amount of force regardless of angle of impact.
~ PROTECTION DESIGN | ENGINEERED RAISED & PADDED AREA REDUCES FORCES TRANSMITTED TO COLLARBONE ~
The base of the M-10 has been sculpted to give a relief section, where the bottom profile is raised to clear the collarbone (clavicle). Also, incorporated into the area of the base pad, where it sits over the rider’s collarbone, is an energy absorption pad; a more flexible compound rubber section which allows deflection when it contacts the clavicle. The Supertech M10 chin-bar is formed with polypropylene which, by allowing for a degree of lateral deflection, further improves impact protection for the collarbones.
~ ULTRA-VENTILATED DESIGN | VISOR DIRECTS AIR INTO PORTS FOR ADDED BREATHABILITY ~
Heat mapping tests have resulted in specifically designed ducting which produces a positive flow into the helmet over and around the rider’s head, improving comfort while riding and reducing the on-set of heat stress in extreme conditions.
The visor design of the M10 is also an integral part of the ventilation system as it is profiled to direct airflow, acting as a channel to concentrate and smooth the flow into the shell. The Supertech liner design is formed to optimise airflow channeling around the rider’s head before being extracted from the M10 through rear exhaust vents to ensure positive pressure is maintained with constant airflow while riding.
~ MULTI-DIRECTIONAL IMPACT PROTECTION SYSTEM® | EXCLUSIVE MULTI-PIECE MIPS® SYSTEM REDUCES ROTATIONAL IMPACT FORCES ~
A low friction ‘slip’ layer is incorporated into the Supertech helmet, between the comfort padding layer and the multi-density polymer energy absorption shell. When energy is impacted upon the helmet, causing a rotation force, the MIPS layer allows for movement of the inner absorption layer to damp and re-direct the energy before causing significant acceleration stress to the brain. This mitigates the causes of brain injuries, such as concussion.
~ ERS EMERGENCY RELEASE SYSTEM | SAFELY & EASILY REMOVE CHEEKPADS WHILE HELMET IS STILL ON ~
The side cheek padding of the Supertech can be extracted efficiently and safely, while the helmet is still on the rider’s head, to allow ease of removal by trackside support and medical staff.
~ HYDRATION COMPATIBILITY | ENGINEERED CANALS IN LINING FOR TUBE ~
The Supertech helmet lining design includes canals which allow a tube to be incorporated on either side of the shell. This is a feature extensively tested by Alpinestars rally raid and enduro riders enabling convenient fitting and connection to a hydration system.
~ EJECT® COMPATIBLE | HELMET EASILY REMOVED IN AN EMERGENCY ~
The Supertech is also designed to allow a helmet ‘Eject’ inflation system to be fitted into the inside crown of the shell.
~ COOL-MAX COMFORT LINER | ANTI-MICROBIAL LINER IS REMOVABLE & WASHABLE ~
Removable liner cover is washable and features a cool-max fabric interior and anti-bacterial talent yarn for long-lasting freshness and quick-dry performance between riding sessions. Helmet features TPE coating washable surfaces to improve maintenance and increase durability
~ 26MM WIDE CHIN STRAP | WIDER THAN CERTIFICATION REQUIREMENTS - FOR SAFETY & COMFORT ~
Wider than certification requirement: 26 mm for comfort and produces with a woven poly yarn to give a soft ‘hand’ feel and connects securely with a double D-ring.
~ ACCESSORIES INCLUDED | SPARE VISOR AND HELMET BAG ~
Conforming to both DOT certification and ECE homologation, the M10 is certified for use worldwide. The DOT 218 standard prescribes specific impact penetration protection over the crown of the helmet area and hence, for the US and Canada markets, the Supertech M10 will feature technology that substantially exceeded the minimum safety requirements.
SPECIAL ORDERS
In order for us to be able to offer the entire range of some products, we have a special order in process. Once you place your order, we will order your items in from our suppliers. This allows you to have more freedom in choice of colour, style, upgrades etc.
Processing time can vary - some items we will have within a few days, whereas some items are ordered in from the United States of America or Europe, and therefore require an extra few weeks to account for shipping time and in some cases, manufacturing time. You will receive an email confirmation when your order has been placed and you will receive status updates on your order as it progresses.
If you have any questions or concerns or would like a rough ETA on order delivery times or stock levels, please get in touch with our customer service team and they will be able to assist you: support@motohouse.com.au or (07) 5681 1505.
ITEMS FROM USA
We place stock orders from the USA every 1-2 weeks - this includes items from Luxon and Guts Racing. We try our best to ensure all items are in stock but if not - please allow an extra 1-2 weeks for your order to be processed.
SHIPPING
We offer free standard shipping on all items - there is no minimum order value required. View our shipping policy here.
RETURNS
If you are unhappy with any items you have purchased, we have a 30 days returns policy - please view here.
