LUXON GEN3 RUBBER ISOLATED 1 1/8" BAR MOUNTS YAMAHA 2-STROKE CONE INTERFACE

Unlike other aftermarket motocross companies, Luxon are an engineering focused company. Their goal is to provide the most advanced products available: light weight and high strength parts with ideal stiffness/flex characteristics. They leverage advanced engineering technology in the design of their products; to a level unmatched in the motocross industry.

Upgrade your harsh solid bar mounts to rubber mounts with Luxon MX Gen3 design. Their 4-post style bar mount is rubber isolated and designed to reduce vibration felt from the engine, eliminate twisting in small crashes and tip-overs, and absorb hard hits and track roughness without compromising steering precision. Three different rubber bushing hardness levels are included to fine tune the feel. Luxon mounts are lighter than stock, yet resist twisting up in crashes with the 4-post design.

These mounts fit stock Yamaha 2-stroke triple clamps and many other clamps with a simple 12 mm unthreaded hole (not ones with rubber cones). The mounts are the stock offset (10 mm of bar position change when flipping the mounts around). Height is increased by only 2.5 mm (25.5 mm high, bottom of bar to top of triple clamp).

Kit Includes:

• Rubber isolated lower bar mounts
• Rubber bushings
• Upper bar clamps
  
• High-strength steel clamp bolts
• Anti-seize
• Instruction manual.

Three different hardness levels of rubber bushings are included at no additional cost. Soft (green) is for lighter riders, vet riders, or those with wrist injuries. Medium (yellow) is recommended for most off-road and motocross use, and hard (red) is recommended for aggressive motocross use and faster riders. It is also possible to mix different hardness levels of top and bottom bushings (for example, medium uppers with hard lowers) for further tuning.

Bushings will "break in" on the first ride and become a little softer than when first installed. Like all rubber bushings, these are wear items and will eventually break down and need replacing. Softer bushings will need to be replaced more often than harder bushings. Replacement bushings are available here.

Depending on the installation type, make and model of bike, bar mount position, etc., you may need to lightly trim plastic brackets and/or relocate hour meters or accessories to allow clearance for these bar mounts in some mount positions (typically not an issue on motocross bike installations).

Luxon 1 1/8" bar mounts fit standard 1 1/8" (28.6 mm) handlebars (sometimes called fatbars) and Luxon 36mm mounts fit the Renthal FB36 bars (36 mm). These are NOT the same as fatbars, they have a much larger clamping diameter. Luxon do not offer bar mounts to fit the old 7/8" size handlebars. Other aftermarket companies offer adapter bushings to fit the 7/8" bar diameter in standard 1 1/8" mounts if necessary.

SPECIFICATIONS

WEIGHT (1 1/8") 378 g, 0.83 lbs
WEIGHT (36 MM) 410 g, 0.90 lbs
STOCK WEIGHT 410 g, 0.90 lbs

RISER KIT

An optional riser kit is available.

Kit Includes:

• 4x 5 mm spacers and longer bolts allowing for +5 mm and +10 mm options for those who prefer a taller bar position.

VIEW INSTALLATION INSTRUCTIONS HERE

BIKE FITMENT:

YAMAHA

• Stock Yamaha 2-stroke triple clamps
• Many other clamps with a simple 12 mm unthreaded hole (not ones with rubber cones).